Bitumen-Polymer Tape

ANTI-CORROSION BITUMEN POLYMERIC SYSTEM «BIZOM-ARM-TERMO»

ANTI-CORROSION BITUMEN AND POLYMER SYSTEM «BIZOM-ARM-TERMO»

Intended for protection against underground and atmospheric corrosion of external surfaces of major steel gas-and-oil pipelines and product conduits to 1220 mm dia. inclusive when their construction and repairs.

The anti-corrosion bitumen and polymer system «BIZOM-ARM-TERMO» consists of «BIZOM-ARM-TERMO» tape and a primer «OZOM-GRUNT-TERMO».

«BIZOM-ARM-TERMO» tape is a self-adhesive roll material coated with a layer of high thermoresistant bitumen and polymer mastic reinforced with glassweb mesh. The mastic layer is protected with anti-adhesion film in order to prevent sticking of tape turns in a roll.

«OZOM-GRUNT-TERMO» is a liquid homogenous composition made on the basis of bitumen, phenol formaldehyde resin and solvents.

«BIZOM-ARM-TERMO» system is classified into grades «BIZOM-ARM-TERMO(60)» and «BIZOM-ARM-TERMO(60) grade «UV» (UV-protected).

PHYSICAL AND MECHANICAL PARAMETERS

Descriptions Measurement conditions Values
Tape thickness, mm  +20 °C 1,6 + 0,1
2,1 + 0,1
Tape width, mm  +20 °C 450 ± 3
225 ± 3
150 ± 3
Backing tape thickness, mm, at least  +20 °C 0,6 + 0,03
Mastic layer thickness, mm, at least 1,0; 1,5
Adhesion of tape to the primed steel surface, kg/cm, at least +20 °C 3,5

APPLICATION

«BIZOM-ARM-TERMO(60)» and «BIZOM-ARM-TERMO(60) grade «UV» are intended for mechanized (with insulating machines, devices) and manual application on a pipeline surface at the ambient air temperature from +40 °С to -20 °C.

According to physical and mechanical and protective properties «BIZOM-ARM-TERMO» system corresponds to «В» class that is a very strong coating as per DSTU 4219-2003.

According to temperature resistance and depending on the maximum operating temperature «BIZOM-ARM-TERMO» system corresponds to class «60» — this system is resistant at a pipeline temperature to +60 °С as per DSTU 4219-2003.

According to resistance under special operating conditions «BIZOM-ARM-TERMO(60) grade «UV» corresponds to «UV» class — this coating is fit for service during long-time UV action.

OUR CLIENTS

Do you have any questions?

Ask them and we shall reply as soon as possible

ORDER THE CALCULATION OF MATERIAL QUANTITY

Contact information:

YOUR ORDER

ASK A QUESTION

Contact information:

Order

Contact information:

INSULATING TAPE ORDER


BECOME A DEALER


Order call back
+

Thank you for your order!

Our manager will contact you in the nearest time.

+

Thank you for your order!

Our manager will contact you in the nearest time.

+

Your application is sent

Our manager will contact you in the nearest time.

+

Form sending error!

Please try again later.