News

Offered for sale: Ramisch Kleinewefers printing line

The printing line is designed for 4-colour printing of PVC films with a thickness of 0.15-0.2 ± 0.02 mm and a width of 1,800 ± 10 mm (possible is extension up to 2,100 mm) with an average printing speed of 40 m/min.

It is used for the production of printed base films, which are the basic component of linoleum. Using in manufacture of PVC decorative furniture films is also possible.

The line is fully automated: synchronization of drive speeds, patterns matching, fabric tension, dye viscosity, alignment of the ends during winding, etc.

GENERAL INFORMATION

  • Year of manufacture: 1987
  • Manufacturer: Ramisch Kleinewefers, Germany
  • The line capacity: 20 millions м²/year

TECHNICAL SPECIFICATIONS

  • Film commodity width: 1800 mm
  • Speed: 6,3-63 m/min
  • Voltage: 3*380 V, 50 Hz
  • Power consumption: 75 kW
  • Heating: steam, 6 bar
  • Flow rate: 1080 kg/hour
  • Air pressure for pneumatic: 7,3 bar
  • Consumption: 2 m³/h
  • Cooling water pressure: 3-4 bar
  • Cooling water flow rate: 20 m³/hour
  • Machine length: 23,5 m

MAIN CONSTRUCTION UNITS OF THE LINE

Drive is a multi-engine synchronous thyristor- controlled installation with a total of 7 adjustment points.:

  • Voltage: 380 V
  • Power: 40 kW

Heating cylinders temperature control Секция глубокой печатиdevice, pneumatic temperature controller:

  • Adjustable temperature range: from 30 to 100 °C
  • Temperature accuracy: 1,5 °C
  • Steam heating system: 6 bar

Floating-roller controlling device — download of printing machine:

  • Operating width: 1800 mm
  • Operating range: 400 mm

Four blocks of intaglio printing include:

  • Drive
  • Back pressure device
  • Squeegee device
  • Installation of intake rollers with colouring tanks and paint pumping device
  • Viscosity regulator
  • Rollers disassembly carriage

Intermediate drying:

  • Dryer length: 25 m
  • Operating width: 1800 mm
  • Heating capacity: 80 kW
  • Quantity: 4 pcs.
  • Dried width: 2500 mm
  • Maximum temperature: 70 °C

Dancer rollers controlling device — printing machine outlet:

  • Operating width: 1800 mm
  • Operating range: 400 mm

Belt conveyor with a vacuum exhaust table:

  • Pressure difference: 1,8 kN/m²
  • Operating width: 1800 mm
  • Driving power: 2,6 kW

Cloth jet dryer — ultimate drying:

  • Dryer length: 3*2500 mm
  • Operating width: 1800 mm
  • Maximum temperature: 1300 °C
  • Dried width: 2500 mm
  • Heating power: 20,4 kW

Supporting structure — a heavy steel construction for blocks and units.

Cooling unit:

  • Cooling cylinder: 3 pcs.
  • Heat carrier: water
  • Temperature: 15 °C
  • Pressure: 5 bar

Crane system loading and unloading of winding and unwinding devices:

  • Compressed air: 7 bar
  • Load capacity: 2000 kg

Winding stand control device

Executor: hydroservodrive

Two-roll rotatable uncoiling device:

  • Roll diameter, max: 1000 mm
  • Reversing range: 150 mm
  • Operating width: 1800 mm

 

SET OF ELECTRIC EQUIPMENT

1. Tanks washing machine:

  • Project № 14-1654-00
  • Manufacturer: D.W.Renzamann GmbH
  • Type: 300
  • Year of manufacture: 1987

2. A set of shafts with drawings: 25 pcs.

 

 

 

For more information, please e-mail: vadim.usatenko@ozomua.com

17/06/2016

Do you have any questions?

Ask them and we shall reply as soon as possible

ORDER THE CALCULATION OF MATERIAL QUANTITY

Contact information:

YOUR ORDER

ASK A QUESTION

Contact information:

Order

Contact information:

INSULATING TAPE ORDER


BECOME A DEALER


Order call back
+

Thank you for your order!

Our manager will contact you in the nearest time.

+

Thank you for your order!

Our manager will contact you in the nearest time.

+

Your application is sent

Our manager will contact you in the nearest time.

+

Form sending error!

Please try again later.